Chicken Salad Chick

Proper cooling methods used: adequate equipment for temperature control — Inspector Note: Observed improper cooling methods for chicken salad in display cooler during time of inspection. CA:1. Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled: (i) Placing the food in shallow pans; Pf (ii) Separating the food into smaller or thinner portions; Pf (iii) Using rapid cooling equipment; Pf (iv) Stirring the food in a container placed in an ice water bath; Pf (v) Using containers that facilitate heat transfer; Pf (vi) Adding ice as an ingredient; Pf or (vii) Other effective methods. Pf 2. When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be: (i) Arranged in the equipment to provide maximum heat transfer through the container walls; and (ii) Loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food. Advised PIC to ensure all TCS foods are cooled using proper methods — from 135F to 70F within 2 hours and from 70F to 41F within a total of 6 hours. Use shallow pans, ice baths, or other approved cooling methods to facilitate rapid cooling. "Just Cool it" Info sheet provided

Insects, rodents, and animals not present — Inspector Note: Observed live gnats in main kitchen. CA: 511-6-1.07(5)(k) - Controlling Pests (Pf, C) (k) Controlling Pests. The presence of insects, rodents, and other pests shall be controlled to minimize their presence on the premises by: 1. Routinely inspecting incoming shipments of food and supplies; 2. Routinely inspecting the premises for evidence of pests; 3. Using methods, if pests are found, such as trapping devices or other means of pest control as specified under subsections (6)(e), (6)(m), and (6)(n) of this Rule; Pf and 4. Eliminating harborage conditions. Advised PIC to contact a licensed pest control company to service the facility within 10 calendar days and provide documentation of treatment upon completion.

Time as a public health control: procedures and records — Inspector Note: Observed cut lettuce held without a documented 4-hour time marking during the inspection. CA: (i) Time as a Public Health Control. 1. Except as specified under paragraph 4 of this subsection, if time without temperature control is used as the public health control for a working supply of time/temperature control for safety food before cooking, or for ready-to-eat time/temperature control for safety food that is displayed or held for sale or service, written procedures shall be prepared in advance, maintained in the food service establishment, and made available to the regulatory authority upon request that specify: Pf (i) Methods of compliance with paragraphs 2(i) - (iv) or 3(i) through (v) of this subsection; and (ii) Methods of compliance with the cooling of time/temperature control for safety food that is prepared, cooked, and refrigerated before time is used as a public health control. Pf 2. If time without temperature control is used as the public health control up to a maximum of 4 hours: (i) Except as specified in paragraph 2.(ii) of this subsection, the food shall have an initial temperature of 41°F (5°C) or less when removed from cold holding temperature control, or 135°F (57°C) or greater when removed from hot holding temperature control;P (ii) The food may have an initial temperature of 70°F (21°C) or less if; (I) It is a ready-to-eat fruit or vegetable that upon cutting is rendered a time/temperature control for safety food, or (II) It is a ready-to-eat hermetically sealed food that upon opening is rendered a time/temperature control for safety food, (III) The food temperature does not exceed 70°F (21°C) within a maximum time period of 4 hours from the time it was rendered a time/temperature control for safety food; and (IV) The food is marked or otherwise identified to indicate the time that is 4 hours past the point in time when the food is rendered a time/temperature control for safety food as specified in paragraph 2.(ii)(I) and (II). (iii) The food shall be marked or otherwise identified to indicate the time that is 4 hours past the point in time when the food is removed from temperature control;Pf (iv) The food shall be cooked and served, served at any temperature if ready-to-eat, or discarded, within 4 hours from the point in time when the food is removed from temperature control;P and (v) The food in unmarked containers or packages, or marked to exceed a 4-hour limit shall be discarded.P 3. If time without temperature control is used as the public health control up to a maximum of 6 hours: (i) The food shall have an initial temperature of 41°F (5°C) or less when removed from temperature control and the food temperature may not exceed 70°F (21°C) within a maximum time period of 6 hours; P (ii) The food shall be monitored to ensure the warmest portion of the food does not exceed 70°F (21°C) during the 6-hour period, unless an ambient air temperature is maintained that ensures the food does not exceed 70°F (21°C) during the 6-hour holding period; Pf (iii) The food shall be marked or otherwise identified to indicate: Pf (I) The time when the food is removed from 41°F (5°C) or less cold holding temperature control, Pf and (II) The time that is 6 hours past the point in time when the food is removed from cold holding temperature control; (iv) The food shall be: (I) Discarded if the temperature of the food exceeds 70°F (21°C), P or (II) Cooked and served, served at any temperature if ready-to-eat, or discarded within a maximum of 6 hours from the point in time when the food is removed from 41°F (5°C) or less cold holding temperature control; P and (v) The food in unmarked containers or packages, or marked with a time that exceeds the 6-hour limit shall be discarded. P 4. A food service establishment that serves a highly susceptible population may not use time as the public health control for raw eggs. Advised PIC that all TPCH foods need to be clearly marked with the time removed from temperature control and the required discardtime (not exceed 4 hours).

Proper cooling methods used: adequate equipment for temperature control — Inspector Note: Observed improper cooling methods during time of inspection. CA:1. Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled: (i) Placing the food in shallow pans; Pf (ii) Separating the food into smaller or thinner portions; Pf (iii) Using rapid cooling equipment; Pf (iv) Stirring the food in a container placed in an ice water bath; Pf (v) Using containers that facilitate heat transfer; Pf (vi) Adding ice as an ingredient; Pf or (vii) Other effective methods. Pf 2. When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be: (i) Arranged in the equipment to provide maximum heat transfer through the container walls; and (ii) Loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food. Advised PIC to ensure all TCS foods are cooled using proper methods — from 135F to 70F within 2 hours and from 70F to 41F within a total of 6 hours. Use shallow pans, ice baths, or other approved cooling methods to facilitate rapid cooling. "Just Cool it" Info sheet provided

Posted: Permit/Inspection/Choking Poster/Handwashing — Inspector Note: Observed permit fees not paid during time of inspection. CA:1. Post the permit in a location in the food service establishment that is conspicuous to consumers Advised PIC to pay the permit fee by the date listed on the Notice of Violation.

Insects, rodents, and animals not present — Inspector Note: Observed live gnats in main kitchen. CA: 511-6-1.07(5)(k) - Controlling Pests (Pf, C) (k) Controlling Pests. The presence of insects, rodents, and other pests shall be controlled to minimize their presence on the premises by: 1. Routinely inspecting incoming shipments of food and supplies; 2. Routinely inspecting the premises for evidence of pests; 3. Using methods, if pests are found, such as trapping devices or other means of pest control as specified under subsections (6)(e), (6)(m), and (6)(n) of this Rule; Pf and 4. Eliminating harborage conditions. Advised PIC to contact a licensed pest control company to service the facility within 10 calendar days and provide documentation of treatment upon completion.