Helene S. Mills Multipurpose Facility

Food properly labeled; original container — Inspector Note: Observed corn meal not labeled and observed a squeeze bottle with a sauce inside the bottle not labeled. COS- items were labeled. 511-6-1.04(4)(d) - Food Storage Containers Identified with Common Name of Food (C) (d) Food Storage Containers, Identified with Common Name of Food. Except for containers holding food that can be readily and unmistakably recognized, such as dry pasta, working containers holding food or food ingredients that are removed from their original packages for use in the food establishment, such as cooking oils, flour, herbs, potato flakes, salt, spices, and sugar shall be clearly and legibly identified, in English, with the common name of the food.

Food properly labeled; original container — Inspector Note: Observed milk best by date 7/10/26. COS- milk was discarded. 511-6-1.04(8)(b) - Expired Foods (P) (b) Expired Foods. Prepackaged sandwiches, eggs, infant formula, shucked oysters, milk, and time/temperature control safety foods that are labeled as “keep refrigerated” and that are for sale or service to the consumer or used as an ingredient in other foods shall be immediately discarded and shall not be sold, served, or used after the manufacturer’s expiration date or the sell-by date. P

Proper cooling methods used: adequate equipment for temperature control — Inspector Note: Observed grits made this morning cooling tightly wrapped and not in a shallow contianer. COS- grits were discarded. 511-6-1.04(6)(e) - Cooling Methods (Pf, C) (e) Cooling Methods. 1. Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled: (i) Placing the food in shallow pans; Pf (ii) Separating the food into smaller or thinner portions; Pf (iii) Using rapid cooling equipment; Pf (iv) Stirring the food in a container placed in an ice water bath; Pf (v) Using containers that facilitate heat transfer; Pf (vi) Adding ice as an ingredient; Pf or (vii) Other effective methods. Pf 2. When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be: (i) Arranged in the equipment to provide maximum heat transfer through the container walls; and (ii) Loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food.

Contamination prevented during food preparation, storage, display — Inspector Note: Observed multiple boxes of food stored directly on the WIF floors. COS- boxes were removed off the ground. 511-6-1.04(4)(q) - Food Storage (C) (q) Food Storage. 1. Except as specified in paragraphs 2 and 3 of this subsection, food shall be protected from contamination by storing the food: (i) In a clean, dry location; (ii) Where it is not exposed to splash, dust, or other contamination; and (iii) At least 6 inches (15 cm) above the floor.

Food and nonfood-contact surfaces cleanable, properly designed, constructed, and used — Inspector Note: Observed a stained cutting board stored as clean. CA- cutting boards shall be cleaned. 511-6-1.05(6)(b) - Cutting Surfaces (C) (b) Cutting Surfaces. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and sanitized, or discarded if they cannot be resurfaced.

Warewashing facilities: installed, maintained, used; test strips — Inspector Note: Observed a high temperature dish machine and observed no rinse agent for the machine. COS- dish machine cannot be used until rinse agent is supplied for the machine. 511-6-1.05(7)(j) - Rinsing Procedures (C) (j) Rinsing Procedures. Washed utensils and equipment shall be rinsed so that abrasives are removed and cleaning chemicals are removed or diluted through the use of water or a detergent-sanitizer solution by using one of the following procedures: 3. If using a warewashing machine that does not recycle the sanitizing solution as specified under paragraph 4 of this subsection, or alternative manual warewashing equipment such as sprayers, use of a nondistinct water rinse must be: (i) Integrated in the application of the sanitizing solution, and (ii) Wasted immediately after each application; or 4. If using a warewashing machine that recycles the sanitizing solution for use in the next wash cycle, use of a nondistinct water rinse that is integrated in the application of the sanitizing solution.

Proper date marking and disposition — Inspector Note: Observed failure to discard foods that were dated pass the 7 day time frame. COS- items that were dated pass 7 days were discarded. 511-6-1.04(6)(h) - Ready-To-Eat Time/Temperature Control for Safety Food, Disposition (P) (h) Ready-to-Eat, Time/Temperature Control for Safety Food, Disposition. 1. A food that requires datemarking shall be discarded if it: (i) Exceeds 7 days, not including the time that the product is frozen; P (ii) Is in a container or package that does not bear a date or day; P or (iii) Is inappropriately marked with a date or day that exceeds 7 days . P 2. Refrigerated, ready-to-eat, time / temperature control for safety food prepared in a food service establishment and dispensed through a vending machine with an automatic shutoff control shall be discarded if it exceeds 7 days. P

Contamination prevented during food preparation, storage, display — Inspector Note: Observed multiple boxes of food stored directly on the WIF floors. CA- PIC stated he has ordered more shelving to be able to store food off the ground. 511-6-1.04(4)(q) - Food Storage (C) (q) Food Storage. 1. Except as specified in paragraphs 2 and 3 of this subsection, food shall be protected from contamination by storing the food: (i) In a clean, dry location; (ii) Where it is not exposed to splash, dust, or other contamination; and (iii) At least 6 inches (15 cm) above the floor.

Food and nonfood-contact surfaces cleanable, properly designed, constructed, and used — Inspector Note: Observed a stained cutting board on the counter. CA- cutting boards shall be cleaned. 511-6-1.05(6)(b) - Cutting Surfaces (C) (b) Cutting Surfaces. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and sanitized, or discarded if they cannot be resurfaced.

Warewashing facilities: installed, maintained, used; test strips — Inspector Note: Observed a high temperature dish machine and observed no rinse agent for the machine. COS- dish machine cannot be used until rinse agent is supplied for the machine. 511-6-1.05(7)(j) - Rinsing Procedures (C) (j) Rinsing Procedures. Washed utensils and equipment shall be rinsed so that abrasives are removed and cleaning chemicals are removed or diluted through the use of water or a detergent-sanitizer solution by using one of the following procedures: 3. If using a warewashing machine that does not recycle the sanitizing solution as specified under paragraph 4 of this subsection, or alternative manual warewashing equipment such as sprayers, use of a nondistinct water rinse must be: (i) Integrated in the application of the sanitizing solution, and (ii) Wasted immediately after each application; or 4. If using a warewashing machine that recycles the sanitizing solution for use in the next wash cycle, use of a nondistinct water rinse that is integrated in the application of the sanitizing solution.

Food-contact surfaces: cleaned & sanitized — Inspector Note: Observed the interior of the ice machine unclean with buildup on the interior flap. COS- ice machine cleaned and will be cleaned more frequently to prevent buildup. 511-6-1.05(7)(b) - Food Contact Surfaces and Utensils - Cleaning Frequency (P, C) (b) Equipment Food-Contact Surfaces and Utensils. 1. Equipment food-contact surfaces and utensils shall be cleaned: (iv) In equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment: (I) At a frequency specified by the manufacturer; or (II) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold.